Software Upgrade Assistant (Kyocera) \u002D Repair Assistant<\/div><\/h1>

Here\x27s how to repair software issues on your Kyocera device or complete an update if the software update failed.<\/div><\/div>

This helps you repair the software on your Kyocera device using your computer \/ PC.<\/div><\/div>

To use the Software Repair Assistant (SRA), ensure the wireless device is powered on and unlocked (if device lock is enabled) then connect it to a compatible computer using the supplied USB cable.<\/div><\/li>
The device may automatically restart a few times during the software repair process, which takes approximately 15 minutes.<\/div><\/li>
The most recent software version becomes available on the SUA \/ SRA tool within a week of a new software update. During this time, the SUA\/SRA is unavailable for usage.<\/div><\/li><\/div><\/ul><\/div><\/div>
Don\x27t disconnect the device from the computer or power it off during the repair process.<\/div><\/div> <\/div><\/section>
Ensure the Software Upgrade Assistant software is installed. Refer to Initial Setup \u002D Software Upgrade Assistant<\/a> for assistance.<\/div><\/span><\/div><\/li>
Ensure the wireless device is powered on and unlocked (if device lock is enabled), then connect it to a compatible computer using the supplied USB cable.<\/div><\/span><\/div><\/li>
From the taskbar (located in the lower right), right\u002Dclick the
Software Upgrade Assistant tray icon<\/div><\/span> (when the SUA does not launch automatically).<\/div><\/span><\/div><\/li>
From the Welcome screen, click
Next<\/div><\/span>.<\/div><\/span><\/div><\/li>
If prompted, click
Repair Assistant<\/div><\/span> from the Assistant Tools column (on the left).<\/div><\/span><\/div><\/li>
If prompted, click
Run Repair Assistant<\/div><\/span>.<\/div><\/span><\/div><\/li>
Select the appropriate device then click
START REPAIR<\/div><\/span> (lower\u002Dright).<\/div><\/span>
If presented, click
OK<\/div><\/span> on the repair confirmation.<\/div><\/div>
A progress bar shows status of repair.<\/div><\/div> <\/div><\/div><\/div><\/li>
Once the software repair is complete, \x27Repair Complete\x27 displays above the status bar.<\/div><\/span><\/div><\/li>
Click
Close<\/div><\/span> (lower\u002Dright) to exit the Repair Assistant.<\/div><\/span><\/div><\/li><\/div><\/ol><\/div> <\/div> <\/article> <\/body>\n<\/html>'; var parsedkb = $($.parseHTML(htmlString)); $('#kbArticleNew').html(parsedkb);