KYOCERA DuraForce PRO 3 <\/div><\/span> Insert or Remove SD \/ Memory Card<\/div><\/h1> If your DuraForce PRO 3 is low on storage, use an SD card for extra space. Follow these steps to insert or remove it without losing data.<\/div><\/div> Steps<\/div><\/h2> - Ensure the phone is powered off.<\/div><\/span><\/div><\/li>
- Remove the back cover and the battery<\/a>.<\/div><\/span><\/div><\/li>
- Locate the SIM \/ microSD card slot inside the battery compartment then pull the card tray out of the slot.<\/div><\/span>
<\/div><\/div><\/div><\/div><\/li>- Do one of the following:<\/div><\/span>
- Insert the SD \/ Memory Card
- Put the tray onto a flat surface and place an SD \/ memory card into the tray. Ensure the gold contacts are facing down as shown. Insert the SD \/ memory card into the tray with gold contacts facing down.
<\/div><\/div><\/li><\/div><\/ol> <\/div><\/li>- Remove the SD \/ Memory Card
- To remove the SD \/ memory card, gently push up on the card from underneath the tray.
<\/div><\/div><\/li><\/div><\/ol> <\/div><\/li><\/div><\/ul><\/div><\/li>- Insert the tray into the SIM \/ microSD card slot. If inserting the SD \/ memory card, be careful not to let the card slide out. Then gently push the tray back into the slot until it fits into place.<\/div><\/span>
<\/div><\/div><\/div><\/div><\/li>- Place the battery back into its compartment, lock it in place by sliding the battery latch then replace the back cover. If necessary, refer to Insert \/ Remove Battery<\/a> for assistance.<\/div><\/span><\/div><\/li><\/div><\/ol><\/div> <\/div> <\/div> <\/div> <\/article> <\/body>\n<\/html>';
var parsedkb = $($.parseHTML(htmlString));
$('#kbArticleNew').html(parsedkb);
KYOCERA DuraForce PRO 3 <\/div><\/span> Insert or Remove SD \/ Memory Card<\/div><\/h1>
If your DuraForce PRO 3 is low on storage, use an SD card for extra space. Follow these steps to insert or remove it without losing data.<\/div><\/div>
Steps<\/div><\/h2> - Ensure the phone is powered off.<\/div><\/span><\/div><\/li>
- Remove the back cover and the battery<\/a>.<\/div><\/span><\/div><\/li>
- Locate the SIM \/ microSD card slot inside the battery compartment then pull the card tray out of the slot.<\/div><\/span><\/div><\/div><\/div><\/div><\/li>
- Do one of the following:<\/div><\/span>
- Insert the SD \/ Memory Card
- Put the tray onto a flat surface and place an SD \/ memory card into the tray. Ensure the gold contacts are facing down as shown. Insert the SD \/ memory card into the tray with gold contacts facing down.<\/div><\/div><\/li><\/div><\/ol> <\/div><\/li>
- Remove the SD \/ Memory Card
- To remove the SD \/ memory card, gently push up on the card from underneath the tray.<\/div><\/div><\/li><\/div><\/ol> <\/div><\/li><\/div><\/ul><\/div><\/li>
- Insert the tray into the SIM \/ microSD card slot. If inserting the SD \/ memory card, be careful not to let the card slide out. Then gently push the tray back into the slot until it fits into place.<\/div><\/span><\/div><\/div><\/div><\/div><\/li>
- Place the battery back into its compartment, lock it in place by sliding the battery latch then replace the back cover. If necessary, refer to Insert \/ Remove Battery<\/a> for assistance.<\/div><\/span><\/div><\/li><\/div><\/ol><\/div> <\/div> <\/div> <\/div> <\/article> <\/body>\n<\/html>';
var parsedkb = $($.parseHTML(htmlString));
$('#kbArticleNew').html(parsedkb);
- Ensure the phone is powered off.<\/div><\/span><\/div><\/li>Remove the back cover and the battery<\/a>.<\/div><\/span><\/div><\/li>Locate the SIM \/ microSD card slot inside the battery compartment then pull the card tray out of the slot.<\/div><\/span>Do one of the following:<\/div><\/span>
- Insert the SD \/ Memory Card
- Put the tray onto a flat surface and place an SD \/ memory card into the tray. Ensure the gold contacts are facing down as shown. Insert the SD \/ memory card into the tray with gold contacts facing down.Remove the SD \/ Memory Card
- To remove the SD \/ memory card, gently push up on the card from underneath the tray.Insert the tray into the SIM \/ microSD card slot. If inserting the SD \/ memory card, be careful not to let the card slide out. Then gently push the tray back into the slot until it fits into place.<\/div><\/span>Place the battery back into its compartment, lock it in place by sliding the battery latch then replace the back cover. If necessary, refer to Insert \/ Remove Battery<\/a> for assistance.<\/div><\/span><\/div><\/li><\/div><\/ol><\/div> <\/div> <\/div> <\/div> <\/article> <\/body>\n<\/html>'; var parsedkb = $($.parseHTML(htmlString)); $('#kbArticleNew').html(parsedkb);