Wi\u002DFi Extender (CE1000A) \u002D Set Up Device \/ Pair<\/div><\/h1>

Here\x27s how to set up the Wi\u002DFi Extender CE1000A.<\/div><\/div>

Wireless (WPS) Pairing<\/div><\/h2>

Plug the Wi\u002DFi Extender into a power outlet next to the ɧ»¢ÊÓƵ Internet Gateway and wait for a solid white light.

<\/div><\/div><\/span><\/div><\/li>

Press and hold the \x27WPS button\x27 on the Wi\u002DFi Extender CE1000A for 3 seconds, then the pair button on the ɧ»¢ÊÓƵ Internet Gateway (within 2 minutes).<\/div><\/span>

Both devices blink blue while pairing.<\/div><\/div>

If there is an error during the pairing process, the Status LED slowly flashes red for two minutes after the error occurs.<\/div><\/div>

Once a solid white or blinking yellow light is observed on the Wi\u002DFi Extender CE1000A, it’s paired.<\/div><\/div>

<\/div><\/div><\/div><\/div><\/li>

Unplug the Wi\u002DFi Extender from the power outlet, move it between the internet gateway and the weak Wi\u002DFi coverage area, then plug into a power outlet.<\/div><\/span>

If a fast\u002Dblinking yellow light is observed, move the extender further away from the internet gateway.<\/div><\/div>

If a slow\u002Dblinking yellow light is observed, move the extender closer to the internet gateway.<\/div><\/div> <\/div><\/div><\/div><\/li>

Once the LED indicator turns solid white, your setup is complete.<\/div><\/span>

For more info on LED indicators, see Wi\u002DFi Extender CE1000A \u002D View LED Status Indicators<\/a> this info.<\/div><\/div> <\/div><\/div><\/div><\/li><\/div><\/ol><\/div> <\/div> <\/div> <\/div>

Wired (Ethernet) Pairing<\/div><\/h2>

Connect the Wi\u002DFi Extender to the router via the Ethernet cable.<\/div><\/span><\/div><\/li>
Plug the Wi\u002DFi Extender into a power outlet and wait for a solid white light.<\/div><\/span>
Both devices blink blue while pairing.<\/div><\/div>
If there is an error during the pairing process, the Status LED slowly flashes red for two minutes after the error occurs.<\/div><\/div>
Once a solid white or blinking yellow light is observed on the Wi\u002DFi Extender CE1000A, it’s paired. This may take up to 10 minutes.<\/div><\/div>
<\/div><\/div><\/div><\/div><\/li>
Unplug the Wi\u002DFi Extender from the power outlet, move it between the internet gateway and the weak Wi\u002DFi coverage area, then plug into a power outlet.<\/div><\/span>
If a fast\u002Dblinking yellow light is observed, move the extender further away from the internet gateway.<\/div><\/div>
If a slow\u002Dblinking yellow light is observed, move the extender closer to the internet gateway.<\/div><\/div> <\/div><\/div><\/div><\/li>
Once the LED indicator turns solid white, your setup is complete.<\/div><\/span>
For more info on LED indicators, see Wi\u002DFi Extender CE1000A \u002D View LED Status Indicators<\/a> this info.<\/div><\/div> <\/div><\/div><\/div><\/li><\/div><\/ol><\/div> <\/div> <\/div> <\/div> <\/article> <\/body>\n<\/html>'; var parsedkb = $($.parseHTML(htmlString)); $('#kbArticleNew').html(parsedkb);