Apple iPhone <\/div><\/span><\/div><\/span>Bring Your Own Device (BYOD) \u002D Transfer SIM \/ eSIM<\/div><\/h1> When you get a new device, you’ll need to transfer your existing phone number to keep using it without interruption. Follow these instructions to move your previous eSIM or physical SIM card info to your BYOD Apple®<\/span> iPhone®<\/span>.<\/div><\/div> Before you begin<\/div><\/h2> Verify you have the following iPhones: - Source device: iPhone 11 and newer (Source device is the previous iPhone with an active line.)<\/div><\/li>
- Target device: iPhone 12 and newer (Target device is the BYOD iPhone that you want to transfer the eSIM or physical SIM to.)<\/div><\/li><\/div><\/ul><\/div><\/div> The BYOD device must be unlocked<\/a>. For iPhones purchased from another carrier, refer to the lock policies for AT\x26T<\/a> or T\u002DMobile<\/a>.<\/div><\/div> Before completing the steps below, verify both devices:
- are updated to iOS15.6 or higher<\/a>.<\/div><\/li>
- signed into the same iCloud account with two\u002Dfactor authentication enabled<\/a>.<\/div><\/li>
- have the screen passcode enabled<\/a>.<\/div><\/li>
- connected to Wi\u002DFi, charged and kept close together while the SIM \/ eSIM transfers.<\/div><\/li><\/div><\/ul><\/div><\/div> <\/div><\/section><\/div> <\/div> <\/div>
Transfer eSIM to eSIM<\/div><\/h2> - On your BYOD (target) iPhone, open the Settings app<\/div><\/span>.<\/div><\/span><\/div><\/li>
- Navigate: Cellular<\/div><\/span>Add eSIM<\/div><\/span><\/div><\/span>.<\/div><\/span> If unavailable, tap Set Up Cellular<\/div><\/span>.<\/div><\/div> <\/div><\/div><\/div><\/li>
- Tap the desired line you want to transfer.<\/div><\/span> If the desired line isn\x27t supported, it\x27s grayed out and shows Transfer Not Supported.<\/div><\/div> You may also select Other Options<\/div><\/span> then select from the available options. Continue to follow the prompts to complete activation.<\/div><\/div> Currently, only the Pixel 10 device is compatible with the Transfer From Android<\/div><\/span> option.<\/div><\/div> <\/div><\/div><\/div><\/li>
- When the Transfer your phone number prompt appears tap Transfer Number<\/div><\/span>.<\/div><\/span><\/div><\/li>
- When the Confirm Transfer on Your Other iPhone prompt appears, on the previous (source) iPhone review the prompt then tap Transfer SIM<\/div><\/span>.<\/div><\/span><\/div><\/li>
- To confirm transfer, double click the side button on the previous (source) iPhone.<\/div><\/span><\/div><\/li>
- From the Add Cellular Plan screen on the BYOD (target) iPhone, tap Continue<\/div><\/span>.<\/div><\/span><\/div><\/li>
- If necessary, do the following:<\/div><\/span>
- Choose a label for each of your cellular plans then tap Continue<\/div><\/span>.<\/div><\/li>
- Select a default line then tap Continue<\/div><\/span>.<\/div><\/li>
- From the iMessage \x26 FaceTime screen, select the desired line then tap Continue<\/div><\/span>.<\/div><\/li>
- Select the default line for cellular data then tap Done<\/div><\/span>. Tap the Allow Cellular Data Switching switch<\/div><\/span> to turn on or off.<\/div><\/div><\/div><\/li><\/div><\/ol> <\/div><\/div><\/div><\/li>
- From the Cellular Setup Complete screen tap Done<\/div><\/span>.<\/div><\/span><\/div><\/li>
- After your BYOD (target) iPhone displays the iPhone is activated prompt, restart your iPhone<\/a>.<\/div><\/span><\/div><\/li><\/div><\/ol><\/div> <\/div> <\/div> <\/div>
Transfer Physical SIM to eSIM<\/div><\/h2> - On your BYOD (target) iPhone, open the ³§±ð³Ù³Ù¾±²Ô²µ²õÌý²¹±è±è<\/div><\/span>.<\/div><\/span><\/div><\/li>
- Navigate: Cellular<\/div><\/span>Add eSIM<\/div><\/span><\/div><\/span>.<\/div><\/span> If unavailable, tap Set Up Cellular<\/div><\/span>.<\/div><\/div> <\/div><\/div><\/div><\/li>
- From the Set Up eSIM screen, tap Transfer from iPhone<\/div><\/span>.<\/div><\/span> If the desired line isn\x27t supported, it\x27s grayed out and shows Transfer Not Supported.<\/div><\/div> You may also select Other Options<\/div><\/span> then select from the available options. Continue to follow the prompts to complete activation.<\/div><\/div> Currently, only the Pixel 10 device is compatible with the Transfer From Android<\/div><\/span> option.<\/div><\/div> <\/div><\/div><\/div><\/li>
- When the Transfer your SIM to this iPhone prompt appears tap Transfer Number<\/div><\/span>.<\/div><\/span><\/div><\/li>
- To confirm transfer, double click the side button on the previous (source) iPhone.<\/div><\/span><\/div><\/li>
- From the Cellular Setup Complete screen tap Done<\/div><\/span>.<\/div><\/span><\/div><\/li>
- After your BYOD (target) iPhone displays the iPhone is activated prompt, restart your iPhone<\/a>.<\/div><\/span><\/div><\/li><\/div><\/ol><\/div> <\/div> <\/div> <\/div>
<\/div><\/h2>
Apple iPhone
<\/div><\/span><\/div><\/span>Bring Your Own Device (BYOD) \u002D Transfer SIM \/ eSIM<\/div><\/h1>
When you get a new device, you’ll need to transfer your existing phone number to keep using it without interruption. Follow these instructions to move your previous eSIM or physical SIM card info to your BYOD Apple®<\/span> iPhone®<\/span>.<\/div><\/div>
Before you begin<\/div><\/h2> Verify you have the following iPhones: - Source device: iPhone 11 and newer (Source device is the previous iPhone with an active line.)<\/div><\/li>
- Target device: iPhone 12 and newer (Target device is the BYOD iPhone that you want to transfer the eSIM or physical SIM to.)<\/div><\/li><\/div><\/ul><\/div><\/div> The BYOD device must be unlocked<\/a>. For iPhones purchased from another carrier, refer to the lock policies for AT\x26T<\/a> or T\u002DMobile<\/a>.<\/div><\/div> Before completing the steps below, verify both devices:
- are updated to iOS15.6 or higher<\/a>.<\/div><\/li>
- signed into the same iCloud account with two\u002Dfactor authentication enabled<\/a>.<\/div><\/li>
- have the screen passcode enabled<\/a>.<\/div><\/li>
- connected to Wi\u002DFi, charged and kept close together while the SIM \/ eSIM transfers.<\/div><\/li><\/div><\/ul><\/div><\/div> <\/div><\/section><\/div> <\/div> <\/div>
Transfer eSIM to eSIM<\/div><\/h2> - On your BYOD (target) iPhone, open the Settings app<\/div><\/span>.<\/div><\/span><\/div><\/li>
- Navigate: Cellular<\/div><\/span>Add eSIM<\/div><\/span><\/div><\/span>.<\/div><\/span> If unavailable, tap Set Up Cellular<\/div><\/span>.<\/div><\/div> <\/div><\/div><\/div><\/li>
- Tap the desired line you want to transfer.<\/div><\/span> If the desired line isn\x27t supported, it\x27s grayed out and shows Transfer Not Supported.<\/div><\/div> You may also select Other Options<\/div><\/span> then select from the available options. Continue to follow the prompts to complete activation.<\/div><\/div> Currently, only the Pixel 10 device is compatible with the Transfer From Android<\/div><\/span> option.<\/div><\/div> <\/div><\/div><\/div><\/li>
- When the Transfer your phone number prompt appears tap Transfer Number<\/div><\/span>.<\/div><\/span><\/div><\/li>
- When the Confirm Transfer on Your Other iPhone prompt appears, on the previous (source) iPhone review the prompt then tap Transfer SIM<\/div><\/span>.<\/div><\/span><\/div><\/li>
- To confirm transfer, double click the side button on the previous (source) iPhone.<\/div><\/span><\/div><\/li>
- From the Add Cellular Plan screen on the BYOD (target) iPhone, tap Continue<\/div><\/span>.<\/div><\/span><\/div><\/li>
- If necessary, do the following:<\/div><\/span>
- Choose a label for each of your cellular plans then tap Continue<\/div><\/span>.<\/div><\/li>
- Select a default line then tap Continue<\/div><\/span>.<\/div><\/li>
- From the iMessage \x26 FaceTime screen, select the desired line then tap Continue<\/div><\/span>.<\/div><\/li>
- Select the default line for cellular data then tap Done<\/div><\/span>. Tap the Allow Cellular Data Switching switch<\/div><\/span> to turn on or off.<\/div><\/div><\/div><\/li><\/div><\/ol> <\/div><\/div><\/div><\/li>
- From the Cellular Setup Complete screen tap Done<\/div><\/span>.<\/div><\/span><\/div><\/li>
- After your BYOD (target) iPhone displays the iPhone is activated prompt, restart your iPhone<\/a>.<\/div><\/span><\/div><\/li><\/div><\/ol><\/div> <\/div> <\/div> <\/div>
Transfer Physical SIM to eSIM<\/div><\/h2> - On your BYOD (target) iPhone, open the ³§±ð³Ù³Ù¾±²Ô²µ²õÌý²¹±è±è<\/div><\/span>.<\/div><\/span><\/div><\/li>
- Navigate: Cellular<\/div><\/span>Add eSIM<\/div><\/span><\/div><\/span>.<\/div><\/span> If unavailable, tap Set Up Cellular<\/div><\/span>.<\/div><\/div> <\/div><\/div><\/div><\/li>
- From the Set Up eSIM screen, tap Transfer from iPhone<\/div><\/span>.<\/div><\/span> If the desired line isn\x27t supported, it\x27s grayed out and shows Transfer Not Supported.<\/div><\/div> You may also select Other Options<\/div><\/span> then select from the available options. Continue to follow the prompts to complete activation.<\/div><\/div> Currently, only the Pixel 10 device is compatible with the Transfer From Android<\/div><\/span> option.<\/div><\/div> <\/div><\/div><\/div><\/li>
- When the Transfer your SIM to this iPhone prompt appears tap Transfer Number<\/div><\/span>.<\/div><\/span><\/div><\/li>
- To confirm transfer, double click the side button on the previous (source) iPhone.<\/div><\/span><\/div><\/li>
- From the Cellular Setup Complete screen tap Done<\/div><\/span>.<\/div><\/span><\/div><\/li>
- After your BYOD (target) iPhone displays the iPhone is activated prompt, restart your iPhone<\/a>.<\/div><\/span><\/div><\/li><\/div><\/ol><\/div> <\/div> <\/div> <\/div>
<\/div><\/h2>
Verify you have the following iPhones:
- Source device: iPhone 11 and newer (Source device is the previous iPhone with an active line.)<\/div><\/li>Target device: iPhone 12 and newer (Target device is the BYOD iPhone that you want to transfer the eSIM or physical SIM to.)<\/div><\/li><\/div><\/ul><\/div><\/div>The BYOD device must be unlocked<\/a>. For iPhones purchased from another carrier, refer to the lock policies for AT\x26T<\/a> or T\u002DMobile<\/a>.<\/div><\/div>Before completing the steps below, verify both devices:
- are updated to iOS15.6 or higher<\/a>.<\/div><\/li>signed into the same iCloud account with two\u002Dfactor authentication enabled<\/a>.<\/div><\/li>have the screen passcode enabled<\/a>.<\/div><\/li>connected to Wi\u002DFi, charged and kept close together while the SIM \/ eSIM transfers.<\/div><\/li><\/div><\/ul><\/div><\/div> <\/div><\/section><\/div> <\/div> <\/div>Transfer eSIM to eSIM<\/div><\/h2>
- On your BYOD (target) iPhone, open theSettings app<\/div><\/span>.<\/div><\/span><\/div><\/li>Navigate:Cellular<\/div><\/span>Add eSIM<\/div><\/span><\/div><\/span>.<\/div><\/span>If unavailable, tapSet Up Cellular<\/div><\/span>.<\/div><\/div> <\/div><\/div><\/div><\/li>Tap the desired line you want to transfer.<\/div><\/span>If the desired line isn\x27t supported, it\x27s grayed out and shows Transfer Not Supported.<\/div><\/div>You may also selectOther Options<\/div><\/span> then select from the available options. Continue to follow the prompts to complete activation.<\/div><\/div>Currently, only the Pixel 10 device is compatible with theTransfer From Android<\/div><\/span> option.<\/div><\/div> <\/div><\/div><\/div><\/li>When the Transfer your phone number prompt appears tapTransfer Number<\/div><\/span>.<\/div><\/span><\/div><\/li>When the Confirm Transfer on Your Other iPhone prompt appears, on the previous (source) iPhone review the prompt then tapTransfer SIM<\/div><\/span>.<\/div><\/span><\/div><\/li>To confirm transfer, double click the side button on the previous (source) iPhone.<\/div><\/span><\/div><\/li>From the Add Cellular Plan screen on the BYOD (target) iPhone, tapContinue<\/div><\/span>.<\/div><\/span><\/div><\/li>If necessary, do the following:<\/div><\/span>
- Choose a label for each of your cellular plans then tapContinue<\/div><\/span>.<\/div><\/li>Select a default line then tapContinue<\/div><\/span>.<\/div><\/li>From the iMessage \x26 FaceTime screen, select the desired line then tapContinue<\/div><\/span>.<\/div><\/li>Select the default line for cellular data then tapDone<\/div><\/span>.Tap theAllow Cellular Data Switching switch<\/div><\/span> to turn on or off.<\/div><\/div><\/div><\/li><\/div><\/ol> <\/div><\/div><\/div><\/li>From the Cellular Setup Complete screen tapDone<\/div><\/span>.<\/div><\/span><\/div><\/li>After your BYOD (target) iPhone displays the iPhone is activated prompt, restart your iPhone<\/a>.<\/div><\/span><\/div><\/li><\/div><\/ol><\/div> <\/div> <\/div> <\/div>Transfer Physical SIM to eSIM<\/div><\/h2>
- On your BYOD (target) iPhone, open the³§±ð³Ù³Ù¾±²Ô²µ²õÌý²¹±è±è<\/div><\/span>.<\/div><\/span><\/div><\/li>Navigate:Cellular<\/div><\/span>Add eSIM<\/div><\/span><\/div><\/span>.<\/div><\/span>If unavailable, tapSet Up Cellular<\/div><\/span>.<\/div><\/div> <\/div><\/div><\/div><\/li>From the Set Up eSIM screen, tapTransfer from iPhone<\/div><\/span>.<\/div><\/span>If the desired line isn\x27t supported, it\x27s grayed out and shows Transfer Not Supported.<\/div><\/div>You may also selectOther Options<\/div><\/span> then select from the available options. Continue to follow the prompts to complete activation.<\/div><\/div>Currently, only the Pixel 10 device is compatible with theTransfer From Android<\/div><\/span> option.<\/div><\/div> <\/div><\/div><\/div><\/li>When the Transfer your SIM to this iPhone prompt appears tapTransfer Number<\/div><\/span>.<\/div><\/span><\/div><\/li>To confirm transfer, double click the side button on the previous (source) iPhone.<\/div><\/span><\/div><\/li>From the Cellular Setup Complete screen tapDone<\/div><\/span>.<\/div><\/span><\/div><\/li>After your BYOD (target) iPhone displays the iPhone is activated prompt, restart your iPhone<\/a>.<\/div><\/span><\/div><\/li><\/div><\/ol><\/div> <\/div> <\/div> <\/div><\/div><\/h2>